Hey refillers, how are you getting into the toner container to fill it up again? the fill cap seems to be glued on very nicely.

I'm pretty sure they have to drill a hole in the cap and then place a sticker over the hole when they are done refilling. I don't know if that is indeed how they do it, but I was asked to refill a cartridge once and that's how I did it.

Buy hole-plugs in bulk and punch your own hole in the cartridge?

Ummm, all u need is a very sharp flat blade,(or 2) and pry it off. I ran into a situation with a Falcon 3 that needed toner and we had none, so I filled it with with Falcon 2 toner, worked like a charm!

quote:

Originally posted by drewsup:
Ummm, all u need is a very sharp flat blade,(or 2) and pry it off. I ran into a situation with a Falcon 3 that needed toner and we had none, so I filled it with with Falcon 2 toner, worked like a charm!

Be careful because some of the black colored caps I found on some of the cartridges were either a molded part of the cartridge or were seated and then heated to melt them in place. The white colored caps are easy to pry off, however.