Does anyone know what port this machine would use for smb scanning? Does it have a place were i can check that? Having a hard time getting one to connect up for smb scanning. I have rechecked all settings and also used these settings on a cs 5050 they have with success. Must be missing something. Since the smb scanning seems to be an after thought on the 6030 i figured there must be some dumb trick to it, Thanks for any help.

Dan,

you need to go to sim U510 to turn enterprise on, that allows scanning to be enabled.

SMB Scanning needs to be turned on in the service mode

quote:

Originally posted by Copymech:
SMB Scanning needs to be turned on in the service mode

SMB comes defaulted to OFF. It's not in the service manual but I'm fairly sure that it's U512. =^..^=

I have smb enabled and you can not turn on smb with enterprise mode set to on. Everything is there and ready but when i do a scan it will error out.So i figured maybe the port is being blocked but wanted to confirm the port it was using.