I know this is probably a dumb question but I have a Fs-1010 hooked up parallel to a win 98 laptop and cannot get the thing to print out more than one set of a print job. The memory is maxed and the FRPO settings have been changed to accomodate the memory...i.e. H8=90 and S5=2. ANy ideas on how to get this to work? Thanks, Brian

You need to activate RAM disk, and allocate between 1/4 to 1/3 of the installed RAM for RAM disk. Acrobat Reader for sure won't print multiples without a RAM disk.

Use Remote Operation Panel or turn it on if there is no NIC installed to browse. Make sure the KX driver also has the correct RAM and RAM disk settings.

ok...thanks for the help Chris. I will try it