Rebuilt fuser with Katun rollers. Anyone else had a problem using these?
Also does the 2310L not use the metal cleaning roller on the press roller?

Heat and Press rollers were changed from the standard 2310/3010 to the 2310L/3010L. The thermistor was also changed and the metal cleaning roller was eliminated. All this is detailed in ai2310L/3010L tech bulletin #1, along with the other changes.

"It's not dead, it's just resting."

Thanks Chris. Do you happen to have the part numbers for the 2310L heat and press rollers since I don't have that bulletin.

quote:

---

Item # Old P/N New P/N Description Quantity
Old/new
Interchangeability
1 ---- 2AR82090 Set, Drum (Emerald Type) 1/1 -/N
2 2AR93101 2AR93102 Parts Cleaning Blade (SP) 1/1 N/N
3 2AR93390 2AR93400 Parts Doctor Blade Ass’y A
(SP)
1/1 N/N
4 2AR93110 2AR93410 Parts Lower Cleaning Seal
A (SP)
1/1 N/N
5 2AR93020 2AR93420 Parts Main Charger Ass’y A
(SP)
1/1 N/N
6 2AR20040 2AR20650 Fixing Thermistor B 1/1 N/N
7 2AR93121 2AR93122 Parts Heat Roller (SP) 1/1 N/N
8 2AR20570 ---- Fixing Cleaning Roller 1/- N/-
9 2AR20580 ---- Fixing Cleaning Brush 2/- N/-
10 2AR20590 ---- Fixing Cleaning Plate
Spring
2/- N/-
11 ---- 2AR04440 Front Cover L (Ai 3010L) -/1 -/N
12 ---- 2AS04060 Front Cover L (Ai 2310L) -/1 -/N

---

Disregard where I said the press roller changed, I was mistaken there.

"It's not dead, it's just resting."

Thanks Chris. Just got the oem heat rollers in, and looks like they changed again because these are 2AR93123.