WE trying to clear this code but it keeps coming, anybody know what the hell of this erorr? when i go to book it says replace the main pwb, am trying to figure which one? please any body familiar withthis problem, and if its really the main pwb? any body know the part number of that part? i really apprciate that.
I have two incidents with that and I had to bring in the kyocera rep to assist me. One was fixed by changing the drum unit. he said that the DMA Error is a grounding problem with the copier. I would also check the voltage. The other time I had to replace the main board and it fixed the problem. The part number is 302GR94121. Hope that may help you.
Posts: 3 | Location: Charleston | Registered: June 25, 2007
I think that's the code we got when we installed a non - KMA HDD. Did you just replace the HDD? I was told to upgrade the firmware again after the HDD install to resolve this, even if it is up to date. We never did and haven't been back for other reasons, so I'm not sure.
Posts: 445 | Location: NH | Registered: January 10, 2003
C0630 Codes 1. When duplexing only, May be HDD, run 906 and reformat w/024.
2. Silver cable mounting screws from the DP harness may be broken where it attaches to the machine rear. Reseating the connection resolves this issue temporarily until new harness connection can be ordered.
Gene
Proximity to stupidity is exhausting!
Posts: 119 | Location: Florida | Registered: February 03, 2005
