Luckily there was no tearing, just saw odd bulges in the belt. Took it out and found two long elastic bands inside. Oh well, I'll just replace it. Thanks tho.
I've seen this happen on two TASKalfa's and 5 or 6 VoyagerE's. Only one of those machine was still running by the time I arrived. Usually you get jamming between the registration roller and the secondary transfer roller. I've also seen color registration issues. In one case there were holes worn through the belt where the edge rubber was bunched up underneath. =^..^=
=^..^=
Posts: 826 | Location: Michigan | Registered: April 04, 2008
I've replaced several transfer belts over the past year with that same problem, but it has usually only been 1 of the rubber bands. I haven't had any issues with Kyocera with a warrenty return.
If at first you don't succeed, redefine success.
Posts: 100 | Location: Texarkana | Registered: October 07, 2009
